If your Arctic Drive car won't start, get into the driver's position and use the vehicle's ignition interaction. Then check fuel and any missing parts still listed in the starter objective. If the engine is running and the car stays put, look at the handbrake before you start swapping parts.
Find the ignition from the driver’s seat
Look for the physical ignition in the driver's view and use the interaction the game shows. In one pre-release player session, the group looked for the ignition on the right of the driver's position. Let the prompt in your own vehicle guide you.
Check fuel and unfinished assembly
In an October demo run, players were still fitting starter parts while refueling the truck. They saw engine, wheels, doors, radiator, and battery in the objective panel. Read the panel if your scenario still has you assembling the car, then fit the listed parts you are missing.
Check the fuel supply separately. If you need to add fuel, inspect the contents of your gas can and use the transfer interaction at the car. The October patch notes explain how the fuel tooltip became easier to read.
Check the handbrake if the engine runs
If you have already started the engine but the car stays in place, check whether the handbrake is engaged. The pre-release group found the brake between the seats and released it with an in-game interaction. That group's report gives you a place to look if you cannot get moving, while the starting objective and fuel supply are better leads when you cannot get the engine going at all.
FAQ
Is there a universal starter key?
The documented pre-release player experience used the physical ignition. Use the displayed control for the vehicle and build you are playing.
What should I check when the starter objective is still open?
Read the list of required parts in the objective panel. The recorded October demo included the engine, wheels, doors, radiator, and battery.
Why does the car stay still after the engine starts?
Check the handbrake first. In the recorded pre-release session, the players had to release it before moving off.